01-23-2023 02:53 PM
hi.
I would like to ask for help if anyone knows about network configuration.
Interface vlan is set as below picture.
Although they are different networks, pc1 and pc2 are communicating.
As I understand it shouldn't be able to communicate, what am I missing?
Solved! Go to Solution.
01-23-2023 03:13 PM
Is routing enabled on your L3 switch? If so, L3 switch will route between directly connected networks.
01-23-2023 03:13 PM
Is routing enabled on your L3 switch? If so, L3 switch will route between directly connected networks.
01-23-2023 08:41 PM
share output of #show ip rout
also enable routing using #ip routing
01-23-2023 11:49 PM
On some models of L3 switches routing is disabled by default; enable it with ip routing or ip routing enable command.
Regards, ML
**Please Rate All Helpful Responses **
01-23-2023 11:53 PM
if this is GNS3, then try other L3SW image, some image have bug.
your config is OK.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide