IOS INFRA 6 PROCPATH CLIENT HOG: IOS SHIM CLIENT 'ck chasfs fd' message.

[vikrammurudkar7589]

Hi everyone,

One my client's perimeter switch has received the below message. Can anyone tell what's the below message is about?

The switch model is C9200L-24T-4X.

iOS version currently installed is 16.12.3a.

Thanks & Regards,

Vikram K Murudkar.

[marce1000]

                             - FYI  https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvy14058

   I would consider it as rather harmless, actually the -6- denotes a logging level which when everything is default, = informational.

 M.

[vikrammurudkar7589]

Hi Marce,

Thanks for the reply.

I'd already searched about that bug on 28th April, 2021. It was 1st reported on 27th April, 2021 & updated on 29th April, 2021. 

I'd also found similar kind of a bug. 

Can you confirm, are both https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvs94143/?rfs=iqvred similar to the one you mentioned CSCvy14058?

Regards,

Vikram K Murudkar.

[adu102501]

Hello

Does this switch use stack ?

Dose this error message occur since the 9200 boot about 220~230 days?

I have a same problem at 9200.

I have 2 sets of 9200s. The power-on time of the 2 sets is about 10 weeks apart, and the time when the abnormal message starts to occur is also 10 weeks apart. I guess this may happen after the 9200 is turned on for a while.

https://community.cisco.com/t5/routing/c9200-excessive-loggs-iosxe-infra-6-procpath-client-hog/td-p/4180779