IOS version software for SSH

[rhopkins_nci]

I have a Catalyst 4503 with ios version Version 12.2(25)EWA6, but it doesnt seem to support ssh. What version is needed or does it support ssh? Thanks in advance.

[sachinraja]

Hello Hopkins

I guess the minimum IOS necessary for 4500 is 12.1(3)EW.. I guess your IOS should support this feature.. Just have a look at this URL for the support and the commands required to enable it..

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a0080094314.shtml#Req

Hope this helps.. all the best...

Raj

[Jon Marshall]

Hi

Your version of IOS does have ssh support but it depends on the feature set you purchased with the version.

Have a look at the following link:-

http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_bulletin0900aecd801e524a.html

You can use the Cisco feature navigator tool to select which feature set you need.

HTH

[Amit Singh · Accepted solution]

Hello,

You need Lan Base K9 images to support the SSH. The exact IOS that you should look for is S4KL3K9-12225EWA6.

Please refer the links below for more info.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm

http://www.cisco.com/en/US/products/sw/iosswrel/ps5460/prod_bulletin0900aecd80281b17.html

HTH,Please rate if it does.

-amit singh

[spremkumar]

Hi

As pointed out Jon you can refer the below link (Feature Navigator) to find out the exact ios code required in your box to have SSH.

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

regds

[royalblues]

You should be having a crptographic image to support SSH.

Narayan