01-29-2014 12:57 AM - edited 03-07-2019 05:52 PM
Availabe in IOS 12.2 (55r).SE7?
Solved! Go to Solution.
01-29-2014 03:36 AM
Steven,
This command did NOT come in play till 12.3.1
The security authentication failure rate command provides enhanced security access to the router by generating syslog messages after the number of unsuccessful login attempts exceeds the configured threshold rate. This command ensures that there are not any continuous failures to access the router.
Regards,
Alex.
Please rate useful posts.
01-29-2014 03:36 AM
Steven,
This command did NOT come in play till 12.3.1
The security authentication failure rate command provides enhanced security access to the router by generating syslog messages after the number of unsuccessful login attempts exceeds the configured threshold rate. This command ensures that there are not any continuous failures to access the router.
Regards,
Alex.
Please rate useful posts.
01-29-2014 05:15 AM
Hi Alex,
Thanks!
11-12-2014 10:24 PM
Hi I wanna know if this command is supported on IOS - XE i tried 3.6.0 as well but it was not supported . Can u help me on pointers for this command in ios-xe or similar equivalent commands on the platform
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: