06-25-2012 06:59 AM - edited 03-07-2019 07:26 AM
I want to run ip https server command. but this command is missing. pleae help me on this.
Switch#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.XO RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Sep-11 19:53 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Image text-base: 0x100A1274, data-base: 0x13CD8B60
ROM: 15.0(1r)SG3
Jawa Revision 7, Winter Revision 0x0.0x3
Switch uptime is 2 days, 5 hours, 45 minutes
System returned to ROM by power-on
Running default software
License Information for 'WS-X45-SUP7L-E'
License Level: entservices Type: Permanent
Next reboot license Level: entservices
cisco WS-C4506-E (MPC8572) processor (revision 4) with 2097152K/20480K bytes of memory.
Processor board ID SPE161500QD
MPC8572 CPU at 1.5GHz, Supervisor 7L-E
Last reset from PowerUp
1 Virtual Ethernet interface
108 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Switch#
06-25-2012 08:05 AM
Hi,
The command is "ip http server", not "ip https server". Also, uif you want to use HTTPS, you should configure "ip https secure-server". See this guide for more details:
Kind Regards,
Ivan
**Please grade this post if you find it useful.
06-25-2012 09:43 PM
Thanks for repying Ivan,
I have tried the ip http secure-server command but command is not recognised. below are the output of the command and available commands
Switch(config)#ip http secure-server
^
% Invalid input detected at '^' marker.
Switch(config)#ip http ?
access-class Restrict http server access by access-class
accounting Set http server accounting parameters
active-session-modules Set up active http server session modules
authentication Set http server authentication method
client Set http client parameters
help-path HTML help root URL
max-connections Set maximum number of concurrent http server
connections
path Set base path for HTML
port Set http server port
server Enable http server
session-module-list Set up a http(s) server session module list
timeout-policy Set http server time-out policy parameters
Switch(config)#ip http
Thanks in advaince
06-25-2012 10:12 PM
Hi,
According to the guide this command should be available:
Maybe you do not have a required license? Check "sh license all", please.
Kind Regards,
Ivan
**Please grade this post if you find it useful.
07-27-2012 12:53 AM
Thanks Ivan for your reply. issue has been solved. issue related to IOS file version. after installing correct IOS issue has been solved.. Thnaks again
12-18-2012 01:38 AM
The IOS needs to be universalk9 to use https and ssh because crypto image is required.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide