Re: JUMBO FRAME SUPPORT on 6509 switch

moorthy1977 · ‎10-18-2006

please let us know whether WS-X6548-GE-TX suports JUMBO FRAME on cisco 6509 switch

Cisco Internetwork Operating System Software

IOS (tm) MSFC3 Software (C6MSFC3-PSV-M), Version 12.2(17a)SX1, EARLY DEPLOYMENT

RELEASE SOFTWARE (fc1)

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 48 10/100/1000BaseT Ethernet WS-X6548-GE-TX no ok

Regards,

Moorthy.

Mikhail.Galiulin · ‎10-18-2006

No, it doesn't...

//Mikhail Galiulin

Anand Narayana · ‎10-18-2006

Hi Moorthy,

WS-X6548-GE-TX supports maximum of 1518 of jumbo frame size.

refer to this page

in "Table 4. Cisco Express Forwarding 256 10/100 and 10/100/1000 Modules"

hope this helps.

rate this post if satisfied.

moorthy1977 · ‎10-25-2006

Hi,

please let me know whether it supports jumbo frame ?

Regards,

Moorthy.

Anand Narayana · ‎10-25-2006

as i posted ealier it supports maximum of 1518 only & not more than in ur module WS-X6548-GE-TX.

hope now you are clear.

moorthy1977 · ‎10-25-2006

Hi,

I think u r talking about MTU SIZE.My requiremnet is whetther it supports Jumbo frame.

Regards,

Moorthy

Anand Narayana · ‎10-25-2006

Hi Moorthy,

NO IT DOESNN"T

WS-X6548-GE-TX

Maximum Frame Size (jumbo frame) Support

Up to 1518 bytes per frame