12-01-2020 03:43 AM
Hello ALL,
i need a suggestion how to put the two links A and B in load balance and avoid loop issues , can someone assist me please?
Thanks in advance
12-01-2020 04:14 AM
You need to creat as normal port-channel and add vpc to it as example below :
interface Ethernet1/3
switchport mode trunk
switchport trunk allowed vlan 10-50,100
channel-group 22 mode active
no shutdown
interface port-channel22
switchport mode trunk
switchport trunk allowed vlan 10-50,100 ( mentioned VLAN allowed in the trunk)
vpc 22
12-01-2020 04:44 AM
Hello BB,
thanks for your reply, can you assist me based on the diagram , in the site A i have two ports 3 and 4 i have to put it in the same port channel and vpc?
and in the B site i have to put port 48 of nexus 1 and port 48 of nexus 2 in the same port-channel and vpc?
Thanks a lot
12-01-2020 04:54 AM
i replied as per your PM. suggest to do 1 channel of communication its save time and easy to track what changes we doing.
12-02-2020 08:18 AM
I make this for you friend take look,
it explain the config with and without vPC.
hope get the idea.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide