cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
660
Views
0
Helpful
1
Replies

Load a tcl procedure into a router

fabio.marino
Level 1
Level 1

Hi to all, i'm Fabio and i have a very simple question.

I wrote a tcl procedure called "save_nvram()".

I saved it into a tcl file called test.tcl.

This file is stored in a tftp server.

Tftp server can communicate with my router.

I was able to load the test.tcl file into the router's flash, but now i'm no able to use the "save_nvram()" procedure. How can i use it?

Thanks Fabio.

1 Accepted Solution

Accepted Solutions

Shelley Bhalla
Level 3
Level 3

I belive this link will help.

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gt_tcl.html

Look out for EEM functionality as well and see if your router supports that as well or not.

Shelley.

View solution in original post

1 Reply 1

Shelley Bhalla
Level 3
Level 3

I belive this link will help.

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gt_tcl.html

Look out for EEM functionality as well and see if your router supports that as well or not.

Shelley.