cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1589
Views
0
Helpful
7
Replies

Log message in Router

accenture-bang2
Beginner
Beginner

                   Hi All,

In one of my router, show logging command show following capure, which I need to disable

Pls find my router config in relevant area.

logging buffered 16384

logging console critical

logging monitor informational logging buffered 16384
logging console critical
logging monitor informational

access-list 20 permit 10.190.186.100 log

Problem description:  In every router in my Network, having the same above config, but only One router showing the loggign messgae in the "show log" command o/p

Pls suggest further asap

BG2RT0502#sh logging
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.


    Console logging: level critical, 3 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level informational, 6 messages logged, xml disabled,
                     filtering disabled
    Buffer logging:  level debugging, 17305 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled

No active filter modules.

    Trap logging: level debugging, 17309 message lines logged
        Logging to 10.190.186.100  (udp port 514,  audit disabled,
              authentication disabled, encryption disabled, link up),
              17309 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled
         
Log Buffer (16384 bytes):
st 20 permitted 10.190.186.100 4 packets
017136: Sep 19 14:31:05.078 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017137: Sep 19 14:36:09.236 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017138: Sep 19 14:41:09.449 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets
017139: Sep 19 14:46:09.656 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017140: Sep 19 14:51:09.861 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017141: Sep 19 14:56:10.062 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets

7 Replies 7

jimmysands73_2
Contributor
Contributor

>>Pls suggest further asap

ASAP? 

Who are you again? lol

accenture-bang2
Beginner
Beginner

Router Log O/p:

BG2RT0502#sh logging
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.


    Console logging: level critical, 3 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level informational, 6 messages logged, xml disabled,
                     filtering disabled
    Buffer logging:  level debugging, 17305 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled

No active filter modules.

    Trap logging: level debugging, 17309 message lines logged
        Logging to 10.190.186.100  (udp port 514,  audit disabled,
              authentication disabled, encryption disabled, link up),
              17309 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled
         
Log Buffer (16384 bytes):
st 20 permitted 10.190.186.100 4 packets
017136: Sep 19 14:31:05.078 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017137: Sep 19 14:36:09.236 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017138: Sep 19 14:41:09.449 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets
017139: Sep 19 14:46:09.656 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017140: Sep 19 14:51:09.861 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017141: Sep 19 14:56:10.062 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets

Hi there,

try this

no access-list 20 permit 10.190.186.100 log

and then

access-list 20 permit 10.190.186.100

thanks

Hi,

I agree to your point, but as per our standard config, we need to have " access-list 20 permit 10.190.186.100 log" this commnad.

Pls note, In our network all other router having the same command, but only 1 router is generating the log message.

Hi ,

is there any debug runing on this router??

like debug ip packets ?

thanks

No debug is running on the router

are you able to attach config from 2 routers.

one with woring and one with not,

thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers