Maximum number of Port-Channels on Catalyst 9200

[Taandav21]

Hello,

I have been trying to find out about the maximum number of configurable port-channels on the Cat 92XX switches. However, I am not able to find this information on Cisco's website or any of the blogs. May be its just me. If you have this information, please share. Thank you in advance.

Best,

TT

[Seb Rupik]

Hi there,

Check the datasheet:

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/datasheet-c78-735989.html

It states the maximum is 512.

cheers,

Seb.

[paul driver]

@Seb Rupik 

Wow - now that’s a lot of aggregation from what was 48 on the 3750's ! -lol 

[Taandav21]

Thanks for sharing the link but it pertains to the Nexus 9200 series. I am looking for the Catalyst 9200 switches.

[Reza Sharifi]

It should be the same as the 9300 series which is <1-128> Channel group number.

HTH

[chawinbo8]

Hi,

I'm looking for this one as well. Finally found it in the config guide

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/16-10/configuration_guide/lyr2/b_1610_lyr2_9200_cg/configuring___etherchannels.pdf

It's 48 Channel Group.

[ElQueue]

Still a lot of EtherChannels. I'm curious who would need more than that. Even assuming you had 96 ports, that's 2 ports per EC and you just barely run out!