11-20-2012 11:47 PM - edited 03-07-2019 10:10 AM
Good day!
I have bought DRAM MEM-2900-2Gb for 2921, and received the following error...
Validation failed for DIMM0
*****System halted*****
%SPD info: DIMM0: Invalid DIMM type (only UDIMMs are supported)
%Dump of SPD info for DIMM0:
00: 80 08 08 0E 0A 01 48 00 05 30 45 06 82 08 08 00
10: 0C 08 38 00 01 05 03 3D 45 50 45 3C 1E 3C 2D 01
20: 20 27 10 17 3C 1E 1E 00 06 3C 7F 80 18 22 0F 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13 B6
40: 7F 40 00 00 00 00 00 00 01 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 19 10
60: 18 10 62 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Validation failed for DIMM0
*****System halted*****
Does it mean, that i have to bought MEM-2900-512U2.5GB, such kit, to upgrade my memory of 2921 to 2.5Gb?
And how can i use only- MEM-2900-2Gb?
Thanks:)
11-21-2012 06:20 AM
Nobody knows how to upgrade 2921 to 2.5Gb RAM?
11-21-2012 06:33 AM
11-21-2012 06:42 AM
Ok.....I have such type of memory - MEM-2900-2Gb. but when i installed such memory in 2921, i have recieved such error while booting
Validation failed for DIMM0
*****System halted*****
%SPD info: DIMM0: Invalid DIMM type (only UDIMMs are supported)
%Dump of SPD info for DIMM0:
00: 80 08 08 0E 0A 01 48 00 05 30 45 06 82 08 08 00
10: 0C 08 38 00 01 05 03 3D 45 50 45 3C 1E 3C 2D 01
20: 20 27 10 17 3C 1E 1E 00 06 3C 7F 80 18 22 0F 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13 B6
40: 7F 40 00 00 00 00 00 00 01 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 19 10
60: 18 10 62 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Validation failed for DIMM0
*****System halted*****
here is my show hardware
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9_NPE-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
ROUTER_CORE_2921 uptime is 7 hours, 1 minute
System returned to ROM by power-on
System restarted at 07:37:22 UTC Wed Nov 21 2012
System image file is "flash0:c2900-universalk9_npe-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco CISCO2921/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FCZ163220H7
2 FastEthernet interfaces
3 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
11-21-2012 07:03 AM
Are you adding the 2Gig to your existing 512 to make it 2.5Gig or repacing it to have a total of 2Gig.
try it both ways.
11-21-2012 09:54 PM
Yea, i'm adding 2Gb to existing 512, i cant replace 512Mb, cause 512Mb is integrated in motherboard of 2921...
Still cant add 2Gb memory...
12-04-2013 11:03 AM
Hi Dmitri,
Did you clear this issue?
I got similar message;
%SPD info: DIMM0: Invalid DIMM type (only UDIMMs are supported)
%Dump of SPD info for DIMM0:
I tried to installed a DIMM 512 in 2911 router in order to have 1GB in DRAM. This DRAM was installed in 3945 and works fine but in 2911 the error message is displayed.
regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: