Migrate Pim mode to dense-mode

[opnineopnine]

Hi all,

I have a 6500 and need to migrate this vlan to a NK 7000

interface Vlan101
 description Prod
 ip address 170.99.89.2 255.255.255.0
 ip helper-address 170.99.90.158
 ip helper-address 170.99.89.162
 ip pim dense-mode
 glbp 0 ip 170.99.89.1
 glbp 0 preempt

Thanks.

1161

[Reza Sharifi]

Hi,

Cisco NX-OS does not support PIM dense mode.

Only sparse mode is supported

See link:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/multicast/configuration/guide/n7k_multic_cli_5x/pim.html

HTH