Monitor stacking ports

[discovery26]

We have 3750 switches and recently we had an issue with cable wasn't plugged in properly. It was hard to see it as it's got a lot of small pins.

I would like to monitor the status of the stacking port. We have appication (Nable) which use SNMP to monitor interface health. Unfortunately I couldn't find OID for stack ports.

Is there any other way to monitor the status of those ports?

[SANTHOSHKUMAR SARAVANAN · Accepted solution]

Hi , 

OID for Stack : 1.3.6.1.4.1.9.1.516

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.1.516&translate=Translate&submitValue=SUBMIT&submitClicked=true

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?mibName=CISCO-STACK-MIB

HTH

Sandy

[chrebert]

Hello,

You have posted in the Small Business Support forums, and we don't usually support Catalyst switches.  You will probably have better luck getting a good answer if you move your post to the Network Infrastructure - LAN Switching forum.

Thank you for choosing Cisco,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center