NAT not working between cisco switch C3560E and 1941 k9 Router

[Zemede]

C3560E cisco switch

my CISCO C3560E switch not working with Router 1941 please can you help me,my configuration as follow

ON ROUTER

G0/0

Ip address DHCP

ip nat outside

No shutdown

G0/10

Ip address 192.168.200.1 255.255 255 252

ip nat inside 

No shutdown 

Ip route 0.0.0.0 0.0.0.0 dhcp

Ip route 192.168.0.0 255.255.0.0 192.168.200.2

Ip nat inside source list 10 int g0/0 overload

Access-list 10 permit 192.168.0.0 0.0.255.256 

ON SWITCH(C3560E with 15.2 IOS version)

Int G0/24

no switchport

Ip address 192.168.200.2 255.255.255.252

No shutdown 

Ip route 0.0.0.0.0.0 0.0.0.0 192.168.200.1

[Georg Pauwen]

Hello,  

post the full running configurations of both devices.

What LAN addresses on the switch side do you want to translate ?

What is the purpose of this route ?

--> Ip route 192.168.0.0 255.255.0.0 192.168.200.2

[Zemede]

I have Vlan 192.168.1.0/24,192.168.2.0/24,192.168.3.0/24.....192.168.12.0/24 VLANS .,I want to translate internet dhcp public IP to these vlans

[Jon Marshall]

Your configuration looks fine except the wildcard mask on the acl ie. you have 0.0.255.256, is that a typo as the last octet should be 255. 

Jon

[paul driver]

Hello

disable ip routing on the switch 

example sw
no ip routing 
ip default-gateway 192.168.200.1

nt G0/24
Ip address 192.168.200.2 255.255.255.0

rtr

G0/10

Ip address 192.168.200.1 255.255 255 0

[Jon Marshall]

Paul

That won't work as he says he has multiple vlans he wants to do NAT for and he must be routing those on the switch. 

Jon

[Zemede]

How Can VLANs access  internet and communicate each other

[Jon Marshall]

Is the acl mask a typo ie. 0.0.255.256 ? 

If it is actually 0.0.0.255 in your configuration then post configuration of router.

Jon