cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
318
Views
4
Helpful
1
Replies

Need help : Fail to upgrade IOS for C3750 stacked switch.

azmirccnp
Beginner
Beginner

Hi,

Recently I've failed to upgrade the newest version of IOS for my stacked 3750 switches (only 2 units).

I've successfully upload the .tar image on the switches and then extract to both of the switches. Before reloading the switches, I change the boot systems to a new extracted IOS with a correct path.

But the problem is, when everything seem to be ok. Master switch will start to initializing/reloading. And this will make both switches to be rebooted again and again.

I was force to go to the rmon, and change the boot system back to the existing IOS.

Have anybody encounter similar issue? Btw, the new IOS that I want to upgrade is c3750-ipservices-tar.122-40.SE.tar.

We manage to upload the same IOS file to our other 3750 switches at other sites.

Attached is the log from the failed upgrade.

1 Reply 1

glen.grant
Advisor
Advisor

First thing I would try is to delete that image and reload it , possible it got corrupted during the download and then work from there. I think we have the same version working on a number of the stacks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: