10-16-2012 10:39 AM - edited 03-07-2019 09:30 AM
Netflow commands are not working in
(IOS-XE 15.0(1r)SG6 ) cat4500e-universalk9.SPA.03.03.00.SG.151-1.SG.bin running on WS-C4500X-32 2 slot switch.
Please suggest on this.
Rgds,
Pandian.
Solved! Go to Solution.
10-16-2012 11:10 AM
Hi,
This switch supports Flexible Netflow, which config guidelines are explained here:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1/XE_330SG/configuration/guide/fnf.html
Kind Regards,
Ivan Shirshin
**Please grade this post if you find it useful.
11-02-2012 07:08 AM
Pandian / Sankar,
You need to use Flexible NetFlow on the new Cisco 4500 series. But the error you get with associating the ip flow monitor is a bug on the Cisco 4500. We have the details in our below blog:
http://blogs.manageengine.com/netflowanalyzer/2011/01/25/missing-out-traffic-with-cisco-4500/
Regards,
Don Thomas Jacob
NOTE: Please rate posts and close questions if your query has been answered
10-16-2012 11:10 AM
Hi,
This switch supports Flexible Netflow, which config guidelines are explained here:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1/XE_330SG/configuration/guide/fnf.html
Kind Regards,
Ivan Shirshin
**Please grade this post if you find it useful.
10-31-2012 01:27 AM
Hi Ivan,
I tried the same, but i am getting the below error when i call the monitor in the interface( physical, vlan and portchannal )
% Flow Monitor: Flow Monitor 'm1'
intf output nf: cannot be supported as match field
and when i issue sh flow monitor m1 command, i am getting the below o/p, in this e1 is inactive, how to activate that???
Flow Monitor m1:
Description: User defined
Flow Record: r1
Flow Exporter: e1(inactive)
Cache:
Type: normal
Status: not allocated
Size: 1000 entries / 0 bytes
Inactive Timeout: 30 secs
Active Timeout: 60 secs
Update Timeout: 1800 secs
By
Sankar V
10-31-2012 03:29 AM
Hi,
One more observation i found, In config terminal ip flow ingress & ip flow ingress layer2-switched are not available. I have enabled IP ROUTING in the global confguration.
Can any one suggest wat is the problem??
By
Sankar V
11-02-2012 07:08 AM
Pandian / Sankar,
You need to use Flexible NetFlow on the new Cisco 4500 series. But the error you get with associating the ip flow monitor is a bug on the Cisco 4500. We have the details in our below blog:
http://blogs.manageengine.com/netflowanalyzer/2011/01/25/missing-out-traffic-with-cisco-4500/
Regards,
Don Thomas Jacob
NOTE: Please rate posts and close questions if your query has been answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide