03-20-2012 07:23 AM - edited 03-07-2019 05:40 AM
We just received a new Nexus 5548 for our lab, and eventually for our 10GB ethernet environment. It will only be used as a layer2 switch.
I have lots of experience with the older Cisco switches (3750s, 6500s, etc), but this will be my first Nexus.
Which document set would you recommend as a getting started? So far I've read the hardware installation guide, but not sure where I should go next.
Thanks
Bill
Solved! Go to Solution.
03-20-2012 07:33 AM
Configuration guide for the NX-OS you are running would be a good place to start
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
Here are some others which you might find handy at a later point.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/operations/n5k_vpc_ops.html
03-20-2012 07:33 AM
Configuration guide for the NX-OS you are running would be a good place to start
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
Here are some others which you might find handy at a later point.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/operations/n5k_vpc_ops.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide