10-21-2021 01:39 AM - edited 10-21-2021 02:04 AM
I am trying to configuration the FC feature on my Nexus 5672UP, everything seem okay but after zoneset activated, nothing happend, server and SAN controller did not see each other.
My step:
- Enable FCoE feature
- Change unified port range to type FC
- Reload chassis
- Plug port from SAN and Server HBA
- Config zone and assgin the members as pwwn of SAN and Server HBA
- Add zone to zoneset and activated zoneset
Did I miss something ?
10-21-2021 01:51 AM
I am not sure if this needs a license or not , -> check Table 16
M.
10-21-2021 01:57 AM
My switch also have installed there features of Storage Protocols Services Package:
FC_FEATURES_PKG
ENTERPRISE_PKG
10-21-2021 01:57 AM
High level those steps should work - now time for troubleshopot and post the outcome here to understand the issue :
Along with relavant port config should helpfull.
10-21-2021 03:11 AM
Here is my configuration:
switch(config)# show feature | grep fcoe fcoe 1 enabled fcoe-npv 1 disabled
switch(config)# sh int brief ------------------------------------------------------------------------------- Interface Vsan Admin Admin Status SFP Oper Oper Port Mode Trunk Mode Speed Channel Mode (Gbps) ------------------------------------------------------------------------------- fc1/33 1 auto on sfpAbsent -- -- -- fc1/34 1 auto on sfpAbsent -- -- -- fc1/35 1 auto on sfpAbsent -- -- -- fc1/36 1 auto on sfpAbsent -- -- -- fc1/37 1 auto on sfpAbsent -- -- -- fc1/38 1 auto on sfpAbsent -- -- -- fc1/39 1 auto on up swl F 8 -- fc1/40 1 auto on sfpAbsent -- -- -- fc1/41 1 auto on up swl F 8 -- fc1/42 1 auto on sfpAbsent -- -- -- fc1/43 1 auto on sfpAbsent -- -- -- fc1/44 1 auto on sfpAbsent -- -- -- fc1/45 1 auto on sfpAbsent -- -- -- fc1/46 1 auto on sfpAbsent -- -- -- fc1/47 1 auto on sfpAbsent -- -- -- fc1/48 1 auto on sfpAbsent -- -- --
switch(config)# sh flogi database -------------------------------------------------------------------------------- INTERFACE VSAN FCID PORT NAME NODE NAME -------------------------------------------------------------------------------- fc1/39 1 0xe40041 50:05:07:68:0b:21:2f:33 50:05:07:68:0b:00:2f:33 fc1/41 1 0xe40080 21:00:00:0e:1e:cc:11:30 20:00:00:0e:1e:cc:11:30 Total number of flogi = 2.
switch(config)# sh zoneset active zoneset name zoneset vsan 1 zone name zone vsan 1 * fcid 0xe40080 [pwwn 21:00:00:0e:1e:cc:11:30] * fcid 0xe40041 [pwwn 50:05:07:68:0b:21:2f:33]
switch(config)# sh vsan membership vsan 1 interfaces: fc1/33 fc1/34 fc1/35 fc1/36 fc1/37 fc1/38 fc1/39 fc1/40 fc1/41 fc1/42 fc1/43 fc1/44 fc1/45 fc1/46 fc1/47 fc1/48 vsan 4079(evfp_isolated_vsan) interfaces: vsan 4094(isolated_vsan) interfaces:
switch(config)# sh license usage Feature Ins Lic Status Expiry Date Comments Count -------------------------------------------------------------------------------- FCOE_NPV_PKG Yes - Unused never - FM_SERVER_PKG No - Unused - ENTERPRISE_PKG Yes - Unused never - FC_FEATURES_PKG Yes - In use never - VMFEX_FEATURE_PKG Yes - Unused never - ENHANCED_LAYER2_PKG Yes - Unused never - NETWORK_SERVICES_PKG No - Unused - LAN_BASE_SERVICES_PKG Yes - In use never - LAN_ENTERPRISE_SERVICES_PKG Yes - Unused never -
10-21-2021 05:38 AM
- (Also) Check the logs when activating or trying to use an FC-port. check if anything comes up. Review current software version installed on the 5672 , use an advisory release :
https://software.cisco.com/download/home/286221337/type/282088129/release/7.3(8)N1(1)
Check if problems remain after that.
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide