I try to do a "no interface" and get negative results. It does however let me step my way through the command which makes me think it was layed out to be the command to make work. It just doesnt work though
No default interface no "no interface" i cannot do anything to clear it in one command?
VB6-DC-CR003(config)# no interface e1/10
^
Invalid range at '^' marker.
VB6-DC-CR003(config)# no interface ?
ethernet Ethernet IEEE 802.3z
loopback Loopback interface
mgmt Management interface
port-channel Port Channel interface
vlan Vlan interface
VB6-DC-CR003(config)# no interface ethernet ?
<1-18> Slot number
VB6-DC-CR003(config)# no interface ethernet 1?
/ Slash separator
<1-18> Slot number
VB6-DC-CR003(config)# no interface ethernet 1/?
<1-128> Port number
VB6-DC-CR003(config)# no interface ethernet 1/10?
, Multi range separator
- Range separator
. Sub interface separator
<1-128> Port number
VB6-DC-CR003(config)# no interface ethernet 1/10
^
Invalid range at '^' marker.
n7000-s1-dk9.4.2.1