12-21-2010 07:40 AM - edited 03-06-2019 02:38 PM
Does anybody know if Nexus 7000 IOS is able to connect Nexus 2000 without Nexus 5000 interface ?
Thanks,
Rosa
12-21-2010 07:44 AM
I haven't done this personally but according to cisco you can connect fabric extenders to the 7000 chassis just fine.
12-21-2010 08:16 AM
Thanks for the answer.
Rosa
12-21-2010 07:46 AM
Hey Rosa,
This is possible on the N7k on 5.1(1) or later code. Checkout the following documentation:
http://cco.cisco.com/en/US/products/ps9402/products_installation_and_configuration_guides_list.html
Thanks,
Adam
12-21-2010 08:16 AM
Thanks for the answer.
Rosa
05-23-2012 11:39 AM
You must connect the Fabric Extender to its parent Cisco Nexus 7000 Series device equipped with a 32-port 10-Gigabit M1 module (N7K-M132XP-12), a 32-port 10-Gigabit M1-XL module (N7K-M132XP-12L), or an F2 module.
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/at_a_glance_c45-644087.pdf
01-05-2013 07:55 AM
And may I connect the N2K to the N7K using the dual-homed capability?
Sent from Cisco Technical Support iPad App
01-05-2013 10:50 AM
https://supportforums.cisco.com/docs/DOC-26022
Danielle, this should help.
01-10-2013 03:21 PM
Many tks!
Sent from Cisco Technical Support iPad App
01-10-2013 10:43 PM
Yes, you can.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus2000/hw/installation/guide/overviewN7K.html
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide