12-09-2012 03:00 PM - edited 03-07-2019 10:29 AM
Dears,
regarding to the out of band Management interface , if I configured an intervace vlan to be as a managment interface for one vdc ( the default vdc )
, when I connected to this vdc via telnet , can I switch to any other vdc ? ( suppose that I have the Admin role which allows me to enter and config all the vdc's )
If that is possible so that I dont have to make a dedicated managment ip for each VDC
I need to do that only if I want to make vdc admin's account to allow some users to access specific vlans only , is that true ?
Solved! Go to Solution.
12-09-2012 04:29 PM
Hi,
Yes, it is possible. When you login as admin and you want to get to another vdc, you just use this command:
switchto vdc
This will take to the that vdc. If you want to switch back to the admin vdc, you just type "switchback"
HTH
12-09-2012 04:29 PM
Hi,
Yes, it is possible. When you login as admin and you want to get to another vdc, you just use this command:
switchto vdc
This will take to the that vdc. If you want to switch back to the admin vdc, you just type "switchback"
HTH
12-10-2012 02:05 AM
thanx for ur reply
04-17-2014 01:36 AM
Hi All,
i tried to access non VDC admin by telnet but i was unable to access VDC admin,
is there a way to access VDC admin when i login another VDC by telnet.
Thanks,
04-17-2014 01:38 AM
Can you ping from non Admin VDC to Admin VDC vice versa?
04-17-2014 03:25 AM
Hi Bilal,
when i was on non Admin VDC and i write "switchback" it didn't take effect.
Thanks,
04-17-2014 04:00 AM
Did you telnet to non admin VDC first? and then try switchback?
04-19-2014 11:31 PM
Hi Bilal,
yes this is my testing and i didn't work?
Thanks
04-20-2014 02:21 AM
Yes, it will not work, the design is to go via admin VDC to all the other VDC's but none of them are allowed to get in to the admin VDC. This behaviour is by default and I do not think we can change this yet.
04-20-2014 02:39 AM
Hi Bilal,
Thanks for your replay.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide