Nexus configured with OSPF can be in a VPC?

[ThomasGoyard76767]

Hello,

I have 2 nexus configured in OSPF to route traffic.

I would like to be able to connect layer 2 on this nexus in etherchannel mode.

Is it supported to configure a VPC between this 2 NEXUS? with 2 new links for the peer link and the management interface for the keepalive.

thanks for your help.

[balaji.bandi · Accepted solution]

Nexus support vPC,  advise to have an individual dedicated Layer 3 link is used for routed traffic and a separate Layer 2 link for Layer2 traffic.

here is reference design :

https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/118997-technote-nexus-00.html