01-02-2012 04:09 AM - edited 03-07-2019 04:08 AM
Hello all, I am wondering if there is "ip route VRF..." command available in NX-OS to support VRF route leaking? Thank you.
01-16-2018 07:07 AM - edited 01-19-2018 04:40 AM
Many thanks for finding that
I tried to do it with Import Maps but no joy - any idea as to where I am going wrong here
ip prefix-list IMPORT-10-53 seq 10 permit 10.53.0.0/16
ip prefix-list EXPORT-10-50 seq 10 permit 10.50.7.0/24
!
route-map IMPORT-MAP-10-53 permit 10
match ip address prefix-list IMPORT-10-53
!
route-map IMPORT-MAP-10-50 permit 10
match ip address prefix-list IMPORT-10-50
!
vrf context ABC
address-family ipv4 unicast
route-target both 1:1
import map IMPORT-MAP-10-53
export map EXPORT-MAP-10-50
!
I'm just trying to share routes between the Global Routing Table and a single VRF
01-19-2018 04:41 AM
07-12-2018 06:30 AM
I got this working on a Nexus 7700 running 7.3x and I didn't need to put in the both route-target import and export commands in the same vrf. It works fine. Did something change in recent code?
vrf context host1
address-family ipv4 unicast
route-target import 1:1
route-target export 1:2
(do not need route-target import 1:2)
vrf context host2
address-family ipv4 unicast
route-target import 1:1
route-target export 1:3
vrf context storage
address-family ipv4 unicast
route-target import 1:2
route-target import 1:3
route-target export 1:1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide