04-24-2018 07:51 AM - edited 03-08-2019 02:47 PM
All,
I have a NIM-1GE-CU-SFP
I have the Media Type set to
interface GigabitEthernet0/1/0
media-type rj45
negotiation auto
If I try to set the speed too 1000 full, it wont let me. Only gives me an option for 10 Meg or 100 Meg.
Any ideas on why?
Router(config)#interface GigabitEthernet0/1/0
Router(config-if)#no negotiation auto
Router(config-if)#speed ?
10 Force 10 Mbps operation
100 Force 100 Mbps operation
Router(config-if)#
Thank you in advance for taking time to read this post.
Carlos
04-24-2018 05:09 PM
04-25-2018 06:08 AM
I would prefer to hard to set the speed to 1000 meg Duplex full. It does not appear I can do this with this particular card.
Are you saying there is not an option to hard set the port to GiG/Full?
04-25-2018 01:13 PM
@cchavezpadky wrote:
I would prefer to hard to set the speed to 1000 meg Duplex full.
I suspect the card will auto-negotiate to 1 Gbps, full duplex if left alone.
04-24-2018 06:15 PM
Hi,
In addition to Leo's comment, make sure you have the right IOS installed.
16.4.1 | 3.15 |
HTH
04-25-2018 01:19 PM
04-25-2018 01:18 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide