I've had some issues out of my 3750 stack. Here's what I would try. Console in, sh int gix/x and make sure that that when you pull the cable the port shows down down rather than up up. If it still shows up up after the cable has been pulled, then make sure you are looking at the correct switch in the stack. I've often times got confused with which one I was looking at.........especially if I am remote. If you still show up up on the port and the cable is pulled then a reboot is warranted. The 3750 stack that we have is at our DR and is the core for that setup. We've had some funky stuff like that happen and it has had to be rebooted which fixes the problem usually..........sometimes a 2nd reboot has to be performed ?. BTW we're running.
Cisco IOS Software, C3750 Software (C3750-ADVIPSERVICESK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 28-Jul-06 12:55 by yenanh
Image text-base: 0x00003000, data-base: 0x01256754
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)
