No web access since using VLAN (SGE2000)

[Guillaume47]

Hello,

Using one SGE2000 switch.

I'm unable to access the switch web interface since I assigned a PVID to the port where my computer is connected.

If I use the PVID 1 and untagging the VLAN 1, it works fine.

What can I do to access the web interface with another VLAN ?

[microfeel]

1. add vlan, for example with id 2.

2. add ip address in vlan 2.

3. port which connected to your computer must be vlan 2 native mode acces, all trafic trought out from this port will untaged.

use command

switchport mode access

or

encapsulation dot1q 2 native

[Guillaume47]

I missed the "Management VLAN" option in the "IPv4 Interface" page. Now it's fine !

Thanks.