03-15-2012 07:07 AM - edited 03-07-2019 05:34 AM
Hello,
Using one SGE2000 switch.
I'm unable to access the switch web interface since I assigned a PVID to the port where my computer is connected.
If I use the PVID 1 and untagging the VLAN 1, it works fine.
What can I do to access the web interface with another VLAN ?
03-15-2012 07:32 AM
1. add vlan, for example with id 2.
2. add ip address in vlan 2.
3. port which connected to your computer must be vlan 2 native mode acces, all trafic trought out from this port will untaged.
use command
switchport mode access
or
encapsulation dot1q 2 native
03-15-2012 08:46 AM
I missed the "Management VLAN" option in the "IPv4 Interface" page. Now it's fine !
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide