09-19-2016 04:53 AM - edited 03-08-2019 07:28 AM
Hi All,
We have a cisco router which is running with version 15-5-1-T2.bin
The problem is that My router is not syncing with NTP server
Config :-
ntp logging
ntp source GigabitEthernet0/1
ntp server 172.16.9.13
interface GigabitEthernet0/1
ip address 172.16.12.14 255.255.255.248
no ip redirects
no ip proxy-arp
ip accounting access-violations
ip flow ingress
ip policy route-map MYMAP1
duplex full
speed 1000
no cdp enable
Logs :-
NTP message sent to 172.16.9.13, from interface 'GigabitEthernet0/1' (172.16.12.4).
NTP message received from 172.16.9.13 on interface 'GigabitEthernet0/1' (172.16.12.4).
NTP Core(DEBUG): ntp_receive: message received
NTP Core(DEBUG): ntp_receive: peer is 0x148650E0, next action is 1.
#sh ntp associations
address ref clock st when poll reach delay offset disp
~172.16.9.13 .LOCL. 1 13 64 35 0.773 -18264. 16.434
* sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
#
09-19-2016 06:14 AM
Can you point the router at a public NTP server to see if that syncs?
Thanks
09-19-2016 08:32 AM
Okay, i had tried it but no luck. Can you gimme some valid pub ntp ip addresses pls.
09-19-2016 12:53 PM
http://www.pool.ntp.org/en/use.html
server 0.pool.ntp.org server 1.pool.ntp.org server 2.pool.ntp.org server 3.pool.ntp.org
09-19-2016 10:35 PM
Will try and get back to you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide