03-14-2013 07:57 AM - edited 03-07-2019 12:14 PM
Guys,
i am having issue with NTP on 5k and not able to sync the time with the server.
03-14-2013 08:00 AM
sb2casw301# show ntp status
Distribution : Disabled
Last operational state: Commit operation failed
03-15-2013 12:00 PM
Hi,
Can ou post the output of a show run ntp, show ntp peer-status and show ntp statistics for each peer?
Also what NX-OS version are you running?
Regards
03-15-2013 12:07 PM
Try adding "ntp distribute" command and test again.
HTH
03-15-2013 12:44 PM
Not sure that will help as that's to enable NTP distribution via CFS. The problem is that the N5K is not syncing with the NTP server.
I presume you have connectivity from the Nexus to the NTP server
Regards
Sent from Cisco Technical Support iPhone App
03-15-2013 12:51 PM
I know ntp distribute is for CFS, but I had the same issue. The NTP was not syncing. I then enabled ntp distribute and commit and NTP worked.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide