04-30-2024 02:33 AM
Hello everybody
so i have been assigned to a task from my manager he wants me to activate ntp on a cisco switch (catalyst 9200 )
i have all the command line but he keeps telling me you are missing something not on the commands but where to apply this ntp on which interface keep in mind we have a local ntp server on our data center , so what concept am i missing i have been searching for a week but i couldn't actually find anything (i read the whole cisco documents).
thanks in advance
Solved! Go to Solution.
04-30-2024 03:09 AM
Sure you need to post the command
Geneally the config you can define as below :
NTP server config
NTP authentication
NTP using source interface
after you configuration do you have ntp association (show ntp association with your local NTP Server ?)
04-30-2024 02:39 AM
- Post commands tried and the (error) responses you get from the switch ,
M.
04-30-2024 03:09 AM
Sure you need to post the command
Geneally the config you can define as below :
NTP server config
NTP authentication
NTP using source interface
after you configuration do you have ntp association (show ntp association with your local NTP Server ?)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide