01-10-2014 08:29 AM - edited 03-07-2019 05:29 PM
I have attempted to create the VSS VSL between two Sup-720-10GB using OneX modules in the sups and passive TwinAx. This fails. Neither switch detects a peer and the VSL remains down. I have also attempted using 10GB-SR optics in the OneX modules and the VSL still stays down. If I use X2 optics instead of the OneX it works fine.
Does anyone know if the OneX modules are supported for VSS? They work fine as uplinks from the 720s. I have tested with 12.2(33)SXI12 and 15.1(2)SY1.
Thanks!
01-10-2014 11:55 PM
I haven't come across 'OneX' before but I do not think it is supported. List of supported modules for the SUP720-10GB are listed here:
X2-10GB-LR | 10GBASE-LR X2 Module |
X2-10GB-SR | 10GBASE-SR X2 Module |
X2-10GB-ER | 10GBASE-ER X2 Module |
X2-10GB-LX4 | 10GBASE-LX4 X2 Module |
X2-10GB-CX4 | 10GBASE-CX4 X2 Module |
Hope this helps.
Please rate useful posts & remember to mark any solved questions as answered. Thank you.
01-11-2014 01:32 AM
Have you tried
service unsupported-transceiver
?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide