Ordering cisco catalyst 4500 E

[afath]

The Cisco Catalyst 4500 Series Supervisor 6L-E by default shipping, whether this card included with IP base image or not ? or else we need to order it seperately ?

Please any one help me to find out the same.

Thanks for your time

Abdul Fathah MK

[Arumugam Muthaiah · Accepted solution]

Hi Absul,

This WS-X45-Sup6L-E will be shipped with LAN Base image by default. If you need IP Base image, you can order seperately. Please see the mode detail below,

S45EES_12253SG - Cisco Catalyst 4500E Cisco IOS Software ENTERPRISE SERVICES W/O CRYPTO

S45EESK9_12253SG - Cisco Catalyst 4500E Cisco IOS Software ENTERPRISE SERVICES SSH

S45EIPB-12253SG - Cisco Catalyst 4500E Cisco IOS Software IP BASE W/O CRYPTO

S45EIPBK9-12253SG - Cisco Catalyst 4500E Cisco IOS Software IP BASE SSH

The Cisco Catalyst 4500 Series Supervisor Engine 6L-E is supported only in Cisco IOS Software and is not supported in the Cisco Catalyst Operating System Software. LAN Base, IP Base, and Enterprise Services packages are supported.

The minimum software versions for the IP Base and LAN Base packages are as follows:

• Supervisor Engine 6L-E, Cisco IOS Software Release 12.2(53)SG or later
  

For the Enterprise Services package the minimum software versions are as follows:

• Supervisor Engine 6L-E, Cisco IOS Software Release 12.2(53)SG2 or later
  

Refer:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-530856.html

Regards,

Aru

*** Please rate if the post is useful ***

[afath]

Thanks for ur support