Packet loss when pinging from/to a cisco 3560e switch

[veerareddy.dubbaka1]

I see Packet loss when pinging from/to a cisco 3560e switch. CPU utilization is normal.

Switches are running with IOS c3560e-universalk9-mz.122-35.SE5.bin.

Packet loss is observed for all the devices irrespective of directly connected or remote devices.

If i do self pinging, there are no packet loss.

I don't see any error on interface.

Can anyone please help me in resolving this issue.

[Madhukrishnan Gopinathan Nair]

Sure Veera,

Hope to hear from you soon.

Also please mark the question as answered if it resolves the issue.

Regards,

Madhu

[Madhukrishnan Gopinathan Nair]

You may consider an upgrade to the fix version of the bug to avoid this in future too.

HTH

Madhu

[veerareddy.dubbaka1]

ok sure.

[veerareddy.dubbaka1]

I could have rate it 4 or 5, mistakenly rate as 1:)

[Madhukrishnan Gopinathan Nair]

Np. you may have an option to rate remaining posts in this :)

Kidding :)

[veerareddy.dubbaka1]

Thanks Madhu.

Established TCP connection is from my laptop. I loged into the device.

will it impact user traffic if i Clearing TCP seesions?

[Madhukrishnan Gopinathan Nair]

It shouldn't be. You will loose ESTAB connection But since it is your laptop connection

only, you may reconnect.

Thanks,

Madhu

[veerareddy.dubbaka1]

Ok.Thanks. I'll try it.

[andrea.castano]

Hi,

thank you for the suggestion: I successfully fixed my problems by clearing appended TCP connections.

Thanks.

A.

[veerareddy.dubbaka1]

Ok Madhu.

Yes, Many of the switches were reloded long back 1yr before

As these switches are located in US ,I am afriad of taking show tech that if the switch hangs .

[veerareddy.dubbaka1]

Hi Madhu,

I tried and it resolved my issue. Thanks a lot

[Madhukrishnan Gopinathan Nair]

My pleasure . Nice to hear issue resolved

Cheers,

Madhu

[veerareddy.dubbaka1]

Just to add, we need to wait for 10 to 15 min once we execute these commands.