08-12-2011 10:10 AM - edited 03-07-2019 01:40 AM
Hello
I have just bought a new 4506-E with SUP7-E runing IOS-XE 3.1.0 SG. At the moment the SUP7-E has a lanbase license and came with the PAK to license it for ipbase. As at the moment in interface configuration mode I'm unable to use the command ip policy. What do I need to be able to do PBR?
Thanks
Dean
Solved! Go to Solution.
08-12-2011 10:24 AM
Hi Dean,
You need full layer-3 (IP services) license to do PBR.
Cisco IOS XE Software Enterprise Services: Upgradable with a SAL; supports full Layer 3 protocols and advanced features such as complete routing scalability (256K), BGP, Virtual Routing and Forwarding, Policy-Based Routing, and so on.
Have a look at this doc:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-612364.html
HTH
08-15-2011 07:03 AM
Did you enable the routing template first?
"sdm prefer routing"
have a look at this doc for some limitations when doing PBR on 3750s
HTH
08-12-2011 10:24 AM
Hi Dean,
You need full layer-3 (IP services) license to do PBR.
Cisco IOS XE Software Enterprise Services: Upgradable with a SAL; supports full Layer 3 protocols and advanced features such as complete routing scalability (256K), BGP, Virtual Routing and Forwarding, Policy-Based Routing, and so on.
Have a look at this doc:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-612364.html
HTH
08-12-2011 10:42 AM
Hi Reza
I see, I guess I would need to purchase L-C4500E-IP-ES once I've applied the ipbase license? Sorry I'm new to this, what's a SAL? Can you purchase these through the Cisco retailer that I purchased the 4506-E and SUP7-E or does it only come directly from Cisco.
Is there no way around the problem as I can make the ACLs and the route maps but can't apply the route map to an interface with the ip policy command?
08-12-2011 11:02 AM
The best way to get the licence is to contact your sales rep for your area. They will provide you the price for it.
Good Luck
08-12-2011 10:32 AM
Hi,
You need (Enterprise Service License) on the SUP7-E to support PBR. all Lan and IP Base features doesnt support PBR.
you have to look for Enterprise License.
Regards,
Mohamed
08-12-2011 10:56 AM
Ok, I'll look into purchasing that, unless there is another way to do a work around (see my reply above).
Thanks.
08-15-2011 06:07 AM
Thanks for the help.
This is slightly off topic but to get around my problem I have tried to configure PBR on my 3750 which has IOS 12.2(25)SEB4 and the IPServices image. I have configured the ACL and the route-map, then I enter interface configuration mode for the vlan I want to apply the policy too and enter the ip policy route-map NAME, which the 3750 excepts. However if I do show ip policy the output is blank, sh run shows that the ip policy is also not on the vlan. I'm not sure why?
08-15-2011 07:03 AM
Did you enable the routing template first?
"sdm prefer routing"
have a look at this doc for some limitations when doing PBR on 3750s
HTH
08-15-2011 07:49 AM
Great, thanks for that Reza.
08-16-2011 03:19 PM
This is strange is there something I'm still missing? I have done sdm prefer routing and reloaded. show sdm prefer confirms that it's now set to desktop routing. However I still can't apply the ip policy interface command to my vlan, show ip policy is still blank.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide