cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1008
Views
0
Helpful
8
Replies

Physically memory shows 1.9GB but memory shows less

Hi Experts , 

Show version shows physical memory as 1.9Gb but show memory statistics shows less memory ..Can you please advice on this. .

 

cisco C9200L-24PXG-4X (ARM64) processor with 523541K/3071K bytes of memory.
Processor board ID JAE251500TE
2 Virtual Ethernet interfaces
16 Gigabit Ethernet interfaces
12 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
1984368K bytes of physical memory.
819200K bytes of Crash Files at crashinfo:.
1941504K bytes of Flash at flash:.

 

Memory issue.PNG

Total memory from above command shows 535Mb of Memory . 

We have an alert in Solarwinds saying high memory utilized ,

 

Mem Solawinds.PNG

8 Replies 8

Leo Laohoo
Hall of Fame
Hall of Fame

@Network_Sarovani wrote:

We have an alert in Solarwinds saying high memory utilized ,


Can you post the complete output to the following commands:

  • show version
  • sh platform software status con brief

NOTE:  Please do not post screenshots.

IND_SWITCH_01>show version
Cisco IOS XE Software, Version 17.03.03
Cisco IOS Software [Amsterdam], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 17.3.3, RELEASE SOFTWARE (fc7)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2021 by Cisco Systems, Inc.
Compiled Thu 04-Mar-21 08:48 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2021 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 17.5.1r [FC4], RELEASE SOFTWARE (P)

IND_SWITCH_01 uptime is 16 weeks, 2 hours, 37 minutes
Uptime for this control processor is 16 weeks, 2 hours, 39 minutes
System returned to ROM by Power Failure or Unknown
System restarted at 14:06:19 PARSUM Fri Oct 15 2021
System image file is "flash:cat9k_lite_iosxe.17.03.03.SPA.bin"
Last reload reason: Power Failure or Unknown

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information:

------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-essentials Smart License network-advantage
dna-essentials Subscription Smart License dna-advantage


Smart Licensing Status: Registration Not Applicable/Not Applicable

cisco C9200L-24PXG-4X (ARM64) processor with 523541K/3071K bytes of memory.
Processor board ID JAE251500TE
2 Virtual Ethernet interfaces
16 Gigabit Ethernet interfaces
12 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
1984368K bytes of physical memory.
819200K bytes of Crash Files at crashinfo:.
1941504K bytes of Flash at flash:.

Base Ethernet MAC Address : 6c:13:d5:24:s1:80
Motherboard Assembly Number : 73-18704-06
Motherboard Serial Number : JAE251800SE
Model Revision Number : B0
Motherboard Revision Number : A0
Model Number : C9200L-24PXG-4X
System Serial Number : JAE251800SE
CLEI Code Number : INM6N00ARA


Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 28 C9200L-24PXG-4X 17.03.03 CAT9K_LITE_IOSXE BUNDLE


Configuration register is 0x102

Please provide the complete output to the following commands: 

sh platform software status con brief

@Leo Laohoo - I do not have access to run the command ...I will share you the output shortly ...

 

I would like to know the difference between Physical memory and the memory value on the switch ?

which memory output are we suppose to monitor ? 

 

output of "show platform software status control-processor brief" or output of "show memory processor statistics" . 

 

 

 

SWITCH#show platform software status control-processor brief
Load Average
Slot Status 1-Min 5-Min 15-Min
1-RP0 Healthy 0.28 0.54 0.59

 

Memory (kB)
Slot Status Total Used (Pct) Free (Pct) Committed (Pct)
1-RP0 Healthy 1984368 1643564 (83%) 340804 (17%) 1749916 (88%)

 

CPU Utilization
Slot CPU User System Nice Idle IRQ SIRQ IOwait
1-RP0 0 7.34 5.07 0.00 86.85 0.62 0.10 0.00
1 8.23 4.32 0.00 86.93 0.41 0.10 0.00
2 8.60 5.84 0.00 84.93 0.51 0.10 0.00
3 6.68 4.72 0.00 88.07 0.41 0.10 0.00

 

CLI output.PNG

SWITCH-01#show process memory platform sort location switch active r0
System memory: 1984368K total, 1643368K used, 341000K free,
Lowest: 331720K
Pid Text Data Stack Dynamic RSS Name
----------------------------------------------------------------------
6201 132751 305364 136 116 305364 linux_iosd-imag
4342 1701 127552 144 70500 127552 confd
7841 159 97824 136 104 97824 fed main event
1824 61 67884 136 168 67884 pubd
2295 289 41000 136 40 41000 ndbmand
16722 116 30576 136 104 30576 sessmgrd
17250 5708 28436 136 52 28436 fman_fp_image
20457 166 23200 136 104 23200 dbm
17576 675 23128 136 92 23128 smand
20163 4834 22108 136 44 22108 fman_rp
2820 143 19944 136 92 19944 dmiauthd
28347 7 19452 136 3000 19452 python3
21121 41 15840 136 52 15840 cli_agent
10292 1183 15316 136 104 15316 cmand
6933 263 15020 136 96 15020 sif_mgr
6739 398 9804 136 92 9804 stack_mgr
18469 135 9448 136 32 9448 repm
21421 58 9436 136 32 9436 psd
9740 430 8968 484 48 8968 hman
9527 288 8276 136 92 8276 install_mgr
16072 199 7936 136 32 7936 iomd
8648 91 7496 136 92 7496 keyman
3651 269 7192 136 92 7192 ncsshd
10709 189 7132 136 92 7132 btman
8302 129 6912 136 92 6912 lman
19596 204 6900 136 32 6900 tms
7619 910 6616 308 4808 6616 ncd.sh
10532 57 6592 136 92 6592 bt_logger
1 1059 6532 132 920 6532 systemd
11151 910 6524 308 4748 6524 auto_upgrade_cl
8934 910 6464 308 4612 6464 issu_stack.sh
8323 189 6380 136 92 6380 btman

Same response to the other (LINK) thread:  

 

Raise a TAC Case and ask them to verify if this is CSCvy12129



Hello Network_Sarovani, 

 

It's highly recommended when your device is running IOS XE version 17.1.X and above, that it operates in INSTALL mode. The Bundle mode consumes more memory than the Install mode because the packages are extracted from the bundle and copied to RAM.

You should try to move to INSTALL mode. In addition, the 17.3.3 is not the current Cisco recommended release for C9200L,  you should also consider an upgrade. Please see useful information inline:

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-9300-series-switches/217607-troubleshoot-and-recover-catalyst-9000-s.html#anc27 

 

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-9300-series-switches/214814-recommended-releases-for-catalyst-9200-9.html 

 

HTH

Leonardo

 

 

Review Cisco Networking for a $25 gift card