I have a WS-C2950T-24 switch that no longer boots. We had a lightening strike in the are and now when the switch boots I get the following. Is this something that can be recovered from or is the switch completely toast? I am thinking completely toast but want to verify before having to purchase a new one.
Initializing flashfs...
flashfs[1]: 359 files, 4 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 4666368
flashfs[1]: Bytes available: 3075072
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
POST: System Board Test : Passed
POST: Ethernet Controller Test : Passed
ASIC Initialization Passed
%Error: initializing transceiver port Fa0/9
%Error: initializing transceiver port Fa0/10
%Error: initializing transceiver port Fa0/11
%Error: initializing transceiver port Fa0/12
%Error: initializing transceiver port Fa0/13
%Error: initializing transceiver port Fa0/14
%Error: initializing transceiver port Fa0/15
%Error: initializing transceiver port Fa0/16
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_INSERT_CMD
cmic_schan_op ERROR: timeout (OP=0x11 polls=100000)
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_DELETE_CMD
cmic_schan_op ERROR: timeout (OP=0xF polls=100000)
