06-29-2016 08:45 AM - edited 03-08-2019 06:25 AM
Hello All,
We are proposing a solution to customer, where we are giving NAT configuration on Cat4506 switch. As I understand from the documentation, that most of the images does not support NAT, but does enterprise services or any other IP related images in Sup6/7 support NAT configuration on 4506.
I could not find any clear yes/no on this from the documentation. Please help urgently.
Regards,
Vikas Purohit
Solved! Go to Solution.
06-29-2016 08:56 AM
Hi
switches in general do not support NAT you need a router for NAT , no upgrade will help you here unfortunately for a 4500 , some 6500 alright do NAT
06-29-2016 08:56 AM
Hi
switches in general do not support NAT you need a router for NAT , no upgrade will help you here unfortunately for a 4500 , some 6500 alright do NAT
09-16-2019 01:48 AM
And here's the official doc stating it.
https://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/29283-166.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide