09-05-2024 01:32 AM
Dear all,
I'm using this configuration for a BW limitation on Cat9500 plt, below ad example:
###################################################
ip access-list extended source-bw-limit
10 permit ip any any
class-map match-all bw-limit-class
match access-group name source-bw-limit
policy-map bw-limit-map-customers
class bw-limit-class
police 1000000 conform-action transmit exceed-action drop
- On interface:
service-policy input bw-limit-map-customers
#############################################
If I use this limit on multiple interfaces, is the limit considered for each interface or is evaluated the sum of input traffic on involved interfaces ?
On nexus there is a specific command to define this matter, but I didn't find something related to Cat9k.
Thanks,
Marcello
09-05-2024 08:22 AM
Hello
you would be policing to that limit on each interface it’s applied to
09-05-2024 08:56 AM
Thank you Paul,
so you mean that evaluated BW is NOT the sum of BW associated to each interface where policy is applied ... is this right ?
Regards,
Marcello
09-05-2024 09:51 AM
Correct.
It only applies to the traffic passing through that particular service-policy class.
09-05-2024 09:55 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide