10-07-2008 01:36 PM - edited 03-06-2019 01:48 AM
hi
i have a a switch with a corupted image on it, i did the steps of sending a new image through the xmodem ..
but i booted from the new image i got this msg
--------------------------
Loading "c3560-ipbasek9-mz.122-25.SED1.bin"...c3560-ipbasek9-mz.122-25.SED1.bin: no such device
Error loading "c3560-ipbasek9-mz.122-25.SED1.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c3560-ipbasek9-mz.122-35.SE5.bin"...@@@@@@@@@@@@@
-----------
i don't know why its looking for the old ios ...
also when i reloded the switch and get the switch# prompt, i did show runn i noteced a command on some ports which i didn't put ( i have configured the vlans and other stuff butt didn't configuer this vlan)
--------------
switchport trunk pruning vlan 2-941,943-1001
-------------------
please see the attached for more information
10-07-2008 01:59 PM
Hi:
Can you execute the following commands and post the output?
sh ver
sh flash
sh boot
dir /all
Thanks
VL
10-08-2008 09:15 AM
10-10-2008 12:02 AM
hi ...
any update ??
10-10-2008 12:07 AM
you must enter config mode and then
issue
boot system flash:/your_new_image.
write te config and then reload.
rate if it helps
regards
10-10-2008 12:14 AM
thx ,
will do it then will give you the feed back
but also after rebooting, and issuing show runn
i see this command under some of the interfaces
switchport trunk pruning vlan 2-941,943-1001
and i didn't write tis command ever..
regards
10-10-2008 12:30 AM
I think you are rely on an old config.
but you can also disable pruning.
Rg
10-10-2008 08:05 AM
thank you
but still i have a problem :(
see this
!
interface FastEthernet0/7
switchport access vlan 44
switchport trunk allowed vlan 1-4077,4079-4094
switchport mode access
!
i didn't issue the trunk command ... is it a bug??
10-14-2008 12:13 AM
any update >??
10-14-2008 12:45 AM
I think that they arent issued themselves.
disable this config.
It might have be an error or bug if not an security issue
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide