Hello,I have a ISR4K router connected through Portchannel to a Cisco 3850 switch.Everything is ok so I have put an IP to port-channel on router side and it is pingable.Meanwhile I have created som BVI interfaces working on different Vlans lets say 20...

Hi to all,I have a CME with CUE as a service module on a 2900 router. Everything works ok but the voicemail when caling or someone wnat to go to Voicemail gets a busy signal....Tryed to debug ccsip messagesand got a Sip 2.0 Internal error 500 on the ...

I have a Snom phone connected to SG350 PO. Have configured POE per prot limiting and it does not work.On LLDP the phone does not get IP from DHCP server.IT shows also invalid signature counter on POE port settings

HI all,I have got sip number from numbers from SIP provider so far the translation rules profiles and dial peers are as below:voice translation-rule 1rule 1 /022799232/ /501/!voice translation-rule 2rule 1 /5../ /022799232/and translation profilesvoi...

Hello we have site to site connetions on a layer2 domain.Socisco3560<----Layer 2 Hardware Encrytor-->ME3400-2CS-A<---Dot1Q tunnel--->ME3400-2CS-A<---LAyer 2 Hardware Encryptor---->Juniper EX 4200I-am receiving Latencies from copynig from clients on j...