06-24-2024 09:24 PM
I am looking for clearance requirement for installing PWR-IE170W-PC-DC for easy air flow
Solved! Go to Solution.
06-24-2024 11:36 PM
have you checked installation guide :
06-25-2024 11:12 PM
Hi, I did checked installation guide but could not find actual clearance for power supply. But in the link you provided states
To prevent the switch assembly from overheating, there must be a minimum of 3 inches (76.19 mm) between any other device and the top, bottom, or sides of the switch assembly.
So this is what we need, I guess.
Thanks for the response. I will follow 3 inches clearance rule between devices.
06-24-2024 11:36 PM
have you checked installation guide :
06-25-2024 11:12 PM
Hi, I did checked installation guide but could not find actual clearance for power supply. But in the link you provided states
To prevent the switch assembly from overheating, there must be a minimum of 3 inches (76.19 mm) between any other device and the top, bottom, or sides of the switch assembly.
So this is what we need, I guess.
Thanks for the response. I will follow 3 inches clearance rule between devices.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide