PWR-IE170W-PC-DC Clearance requirement

[Blamichhane]

I am looking for clearance requirement for installing PWR-IE170W-PC-DC for easy air flow

[balaji.bandi · Accepted solution]

have you checked installation guide :

https://www.cisco.com/c/en/us/td/docs/switches/connectedgrid/ie2000u/hardware/installation/guide/IE2000u/HIGINSTL.html

[Blamichhane · Accepted solution]

Hi, I did checked installation guide but could not find actual clearance for power supply. But in the link you provided states

To prevent the switch assembly from overheating, there must be a minimum of 3 inches (76.19 mm) between any other device and the top, bottom, or sides of the switch assembly. 

So this is what we need, I guess. 

Thanks for the response. I will follow 3 inches clearance rule between devices.