el 06-24-2024 09:24 PM
I am looking for clearance requirement for installing PWR-IE170W-PC-DC for easy air flow
¡Resuelto! Ir a solución.
el 06-24-2024 11:36 PM
have you checked installation guide :
el 06-25-2024 11:12 PM
Hi, I did checked installation guide but could not find actual clearance for power supply. But in the link you provided states
To prevent the switch assembly from overheating, there must be a minimum of 3 inches (76.19 mm) between any other device and the top, bottom, or sides of the switch assembly.
So this is what we need, I guess.
Thanks for the response. I will follow 3 inches clearance rule between devices.
el 06-24-2024 11:36 PM
have you checked installation guide :
el 06-25-2024 11:12 PM
Hi, I did checked installation guide but could not find actual clearance for power supply. But in the link you provided states
To prevent the switch assembly from overheating, there must be a minimum of 3 inches (76.19 mm) between any other device and the top, bottom, or sides of the switch assembly.
So this is what we need, I guess.
Thanks for the response. I will follow 3 inches clearance rule between devices.
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros