PXE boot config on Cisco Switch

[Adnan Khan]

Hi,

I have a DHCP server in main office and I want my branch office machines to obtain IP via PXE boot. I have configured IP helper address for that vlan. Is there any specific PXE boot setting or configuration required on the switch other than helper address. DHCP server is also enabled for PXE server.

[balaji.bandi]

cisco device point of view - only ip helper-address, from there DHCP need to take care.

if it is DHCP by Microsoft look below :

https://docs.microsoft.com/en-us/troubleshoot/mem/configmgr/boot-from-pxe-server

[Adnan Khan]

Thanks, Balaji, yes it is the windows DHCP server.  From the Switch, only the IP helper address is required on VLAN SVI. I will let you know.