11-18-2019 01:36 PM - edited 11-21-2019 12:49 PM
Router to receive VOIP on interface fastethernet 0/1 and ensure it survives on the WAN link.
Solved! Go to Solution.
11-18-2019 02:57 PM
Hello,
something like the below should work. The exact syntax depends on which router and which IOS you have...
class-map match-all DSCP_EF
match ip dscp ef
!
policy-map OUT_DSCP
class DSCP_EF
set precedence 5
class class-default
fair-queue
!
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
service-policy OUT_DSCP out
11-18-2019 02:40 PM
here is the configuration start with :
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/qos_solutions/QoSVoIP/QoSVoIP.html
11-18-2019 02:53 PM - edited 11-18-2019 02:57 PM
Thank you
11-18-2019 02:57 PM
The document i have provided all the information, suggest read and understand - make a config based on your requirement and test it.
or do basic config, we can help you tweak if required.
11-18-2019 02:57 PM
Hello,
something like the below should work. The exact syntax depends on which router and which IOS you have...
class-map match-all DSCP_EF
match ip dscp ef
!
policy-map OUT_DSCP
class DSCP_EF
set precedence 5
class class-default
fair-queue
!
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
service-policy OUT_DSCP out
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide