rate limiting VLAN interface Cisco 6500 native IOS/sup2

[rkazala]

I'm looking to learn a bit more about rate limiting a VLAN interface on a Cisco 6509 running native IOS/sup2.

Sadly, I'm coming up with no documentation on the subject and I'm wondering if anyone has had any experience doing this.

[Prashanth Krishnappa]

You cannot do rate-limiting like on routers on ethernet/VLAN interfaces. You need to use PFC QoS(aka Policing)

http://www.cisco.com/warp/public/473/102.html

Note that you can only do ingress policing with Sup2/MSFC2

[rkazala]

Thank you!

Could you possibly provide me with a config sample to say, rate limit all ingress trafic on a specific VLAN interface to 300Mb to compare with what I come up with?