cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
690
Views
0
Helpful
2
Replies
Highlighted
Beginner

Remote Span with C2960

Hi

I am trying to configure RSPAN for one of my client. They have Server-Client VTP architecture.

Voice Recording Server is connected to C4507.

Agents are connected to C2960 and C3750.

I got 2 sessions configured and the connectivity is a as follows:

1. Voice Recording Server-----C4507-----C2960-----C2960-----Agent IP Phones (Session 1)

2. Voice Recording Server-----C4507-----C3750-----Agent IP Phones (Session 2)

Recording works with Session-2 but not with Session-1. I understand the problem could be due to multiple reasons:

1.1. C2960 is working in client VTP mode so i cannot add remote span command under the vlan configuration.

1.2. C2960 has LANLITE IOS image which i am not sure if it supports Remote Span.

Looking forward for valuable advices.

R

Ibrahim SAYEED


Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Expert

Remote Span with C2960

Hi,

On the 2960 series, you need LAN Base image to do RSPAN.

Here is the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/swspan.html

HTH

2 REPLIES 2
VIP Expert

Remote Span with C2960

Hi,

On the 2960 series, you need LAN Base image to do RSPAN.

Here is the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/swspan.html

HTH

Beginner

Remote Span with C2960

Thanks Reza.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards