Replacement for Cisco N2K2232PP-10GE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 04:07 AM
Hello,
I need to replace below switches which are EOL, which switch would be better in line with these model ? please suggest. Thanks in advance.
N2K-C2232PP-10GE
N2K-C2248TP-E-1GE
N5K-C5596UP
N9K-C93180YC-EX
- Labels:
-
Catalyst 9000
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 04:21 AM
- Assuming you are aware as to the purpose of these devices on your network, you may for instance start searching (yourself) by looking at :
https://www.cisco.com/c/en/us/products/switches/switch-selector.html
M.
-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 04:31 AM
N9K-C93180YC-EX <<- you want to replace this NSK ? can I know why?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 04:38 AM
Hello, the EOL listed for N9K-C93180YC-EX is Aug 21 and EOS is Aug 24. Although its still time but not very urgent for this switch. Our organization is currently auditing for EOL and EOS ones and these are the ones being shown as EOS. Thats why asking for suggestions if this can be continued with a replacement model or shall we go continue with the same.
Thank you.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 04:33 AM
Hello Marce, yes I did check that link but unfortunately there are no suggestions for replacement beyond Catalyst 6880. Attached snapshot for reference.
Thank you.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 04:52 AM
- In essence , it does not matter , check 'what you need' (replacing that device) in the network , for that purpose , use the switch selector -> start from scratch ,
M.
-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 04:36 AM
https://www.cisco.com/c/en/us/products/switches/switch-selector.html?guide=data_center|lantype|lannewswitch|lancore
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 05:10 AM
Hello @Karthik N,
Fabrice Extender N2k will not be replace. FEX is the old world now (lol).
You can switch to N5K or N9K series with back to back vPC configuration with your SW-CORE.
https://dmitrygolovach.com/cisco-nx-os-from-vpc-to-back-to-back-vpc/
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2023 05:20 AM
Fex is different than back to back vPC'
He can use nexus 9300 supoort fex
https://www.cisco.com/c/dam/en/us/td/docs/Website/datacenter/fexmatrix/fexmatrix.html
I prefer he contact cisco sales engineer' he can give best solution within his budget
