12-23-2010 09:59 AM - edited 03-06-2019 02:41 PM
Hi I have two 6500 chassis and plan to upgrade the supervisors from sup32 to sup720.
What is the correct procedure to do this?
I imagine it's the following but I'd like to be sure.
Backup config
power down switch
boot off new sup720
restore config
Many thanks
Solved! Go to Solution.
12-23-2010 10:40 AM
You got the gist of it. Sup32 and sup720's will go in the same slots so nothing else will change other than some interface numbering on the sup itself.
-Matt
12-23-2010 10:40 AM
You got the gist of it. Sup32 and sup720's will go in the same slots so nothing else will change other than some interface numbering on the sup itself.
-Matt
12-23-2010 01:03 PM
Hi I have two 6500 chassis and plan to upgrade the supervisors from sup32 to sup720.
Can you delay the upgrade of the Sup720? The new VSS-Sup2T will be out by mid-2011.12-24-2010 01:45 AM
Time and budget constraints mean than I need to get them ordered and installed within about 2 week max, so I can't afford to wait for new VSS-Sup2T, as much as I would like to.
Thanks for the advice.. should be fairy stright forward then.
Lee
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide