Set clock time zone

[SlipperyPete]

Is there a way to set the time zone on routers/switches? We're in the Eastern time zone, but some of my switches show UTC (Greenwich Mean Time/Zulu time). I'd like all of them to show the local time, just to make it easier to read.

[Thotsaphon Lueangwattanaphong]

Patrick,

You can.

Router(config)# clock timezone <(-23) - (23) ;Hours offset from UTC>

F.e Router(config)# clock timezone CST -6

HTH,

Toshi

[SlipperyPete]

Thanks very much for the help.

Pat

[hlakhaing693672910]

MYANMAR

[Georg Pauwen]

Hello,

Myanmar is:

UTC +6:30

[asif.naveed]

Dallas Texas ?

[Richard Burts]

Dallas Tx would be CST -6

[asif.naveed]

Thanks a lot

[Shaqxify]

How will this work with CAT which is +2 GMT? 

[Shaqxify]

Got it

Clock timezone CAT 9 11

[Edison Ortiz]

Toshi has provided the syntax the modify the timezone in the router (btw, Eastern time zone in the US is EST -5).

If you want to see this time being stamped on the log, you need the 'service timestamps' command which can be applied to log messages as well as debug messages

http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_r1.html#wp1030116

HTH,

__

Edison.

[syedajim1123617]

Hi guys idk why its say APIPA being used. I've try almost everything i knew but still the same. The server has been set to static.